Sentry 1250

The Sentry 1250 provides alternating pressure relief while stimulating peripheral circulation. The 20 individual air cells alternately inflate and deflate, with the possibility to change the alternation from 4 to 15 minutes depending on patient’s need. This system is designed to provide reduction in tissue interface pressure during the entire cycle.

Maximum weight: 500 lbs
Warranty: 2 years
Manufacturer: Tridien
Availability: Rental Only

Description

MAIN FEATURES

  • Alternating and static modes (air flotation mode)
  • Sentry 1400 provides low air loss Microvent Technology, on demand, which provides a flow air directly to the patient through the top cover (20 litres/min).
  • Low profile side bolsters and four (4) additional 3’’ inflatable/ deflatable bolsters to help keep patients centered and provide additional support between mattress and side rails
  • Max inflate used for either patient’s transfer or patient’s care
  • Fowler Boost helps patients placed in an upright position

AUTOMATIC ADJUSTMENT OF THE PRESSURE

  • Following the programming of the pump, the microprocessor controlled unit maximizes precision and reliability.

TRANSPORT

  • The Sentry 1250 will stay inflated for 24 to 48 hours

COVER

  • Detachable, water resistant and vapour permeable
  • Without visible seams or latex
  • Fire-retardant, waterproof, antistatic, antibacterial/antimicrobial
  • Protected zipper

PUMP

  • Silent pump
  • Visual and audible alarm to notify a low pressure
  • Dimensions : 15,75’’ x 5,5’’ x 8 ‘’
  • Type of motor: compressor
  • Pump weight : 7,9 lbs
  • Manual programming of patient’s weight.
  • Following the programming, microprocessors adjust the pressure according to real-time patient’s movement
  • Cycle of alternating pressure from 4 to 15 minutes

GENERAL INFORMATION

  • Quilted cover
  • Standard bedding
  • Silent pump
  • CSA approved
  • Health Canada approved
  • Detachable, waterproof, antibacterial, antimicrobial
  • Cover easy to clean
  • Emergency cell deflating in less than 10 seconds
  • Low and high pressure alarm

TECHNICAL SPECIFICATIONS

  • Dimensions : 36’’ x 80’’ x 6,5’’ (also available in 39’’ and 42’’ wide)
  • Alternate and static (air flotation mode)
  • Horizontal air cells
  • Presence of a foam mattress of 1’5’’
  • Transport mode : 24 to 48 hours
  • Suitable for patients weighing up to 500 lbs
  • Manual programming of patient’s weight
  • Following the programming, microprocessors adjust the pressure according to real-time
  • Visual and audible alarm to notify a low pressure
Scroll to Top