Sentry 1250
The Sentry 1250 provides alternating pressure relief while stimulating peripheral circulation. The 20 individual air cells alternately inflate and deflate, with the possibility to change the alternation from 4 to 15 minutes depending on patient’s need. This system is designed to provide reduction in tissue interface pressure during the entire cycle.
Maximum weight:
500 lbs
Warranty:
2 years
Manufacturer:
Tridien
Availability:
Rental Only
Description
MAIN FEATURES
- Alternating and static modes (air flotation mode)
- Sentry 1400 provides low air loss Microvent Technology, on demand, which provides a flow air directly to the patient through the top cover (20 litres/min).
- Low profile side bolsters and four (4) additional 3’’ inflatable/ deflatable bolsters to help keep patients centered and provide additional support between mattress and side rails
- Max inflate used for either patient’s transfer or patient’s care
- Fowler Boost helps patients placed in an upright position
AUTOMATIC ADJUSTMENT OF THE PRESSURE
- Following the programming of the pump, the microprocessor controlled unit maximizes precision and reliability.
TRANSPORT
- The Sentry 1250 will stay inflated for 24 to 48 hours
COVER
- Detachable, water resistant and vapour permeable
- Without visible seams or latex
- Fire-retardant, waterproof, antistatic, antibacterial/antimicrobial
- Protected zipper
PUMP
- Silent pump
- Visual and audible alarm to notify a low pressure
- Dimensions : 15,75’’ x 5,5’’ x 8 ‘’
- Type of motor: compressor
- Pump weight : 7,9 lbs
- Manual programming of patient’s weight.
- Following the programming, microprocessors adjust the pressure according to real-time patient’s movement
- Cycle of alternating pressure from 4 to 15 minutes
GENERAL INFORMATION
- Quilted cover
- Standard bedding
- Silent pump
- CSA approved
- Health Canada approved
- Detachable, waterproof, antibacterial, antimicrobial
- Cover easy to clean
- Emergency cell deflating in less than 10 seconds
- Low and high pressure alarm
TECHNICAL SPECIFICATIONS
- Dimensions : 36’’ x 80’’ x 6,5’’ (also available in 39’’ and 42’’ wide)
- Alternate and static (air flotation mode)
- Horizontal air cells
- Presence of a foam mattress of 1’5’’
- Transport mode : 24 to 48 hours
- Suitable for patients weighing up to 500 lbs
- Manual programming of patient’s weight
- Following the programming, microprocessors adjust the pressure according to real-time
- Visual and audible alarm to notify a low pressure